Mosquito coil aluminum pipe

Product Description:

1. To prevent waste, the pipe can be made of copper or another material that best suits the needs of the air conditioning installation site. Once the pipe is too lengthy, copper connectors and aluminum tubes just bend up the back of the machine, compromising its appearance while also wasting energy.

2. Galvanic corrosion will not occur because the connecting tube appears to be made of the same copper pipe and the connection still uses brass nuts. without any deterioration after 1500 hours of salt spray testing.

3.The copper-clad aluminum air conditioner connection tube is made of two layers of metal and a layer of metallurgical glue. Due to the defects in the copper tube and aluminum alloy tube is almost impossible to appear in the same part, compared with the single copper tube, aluminum tube, aluminum alloy tube its anti-leakage performance is excellent, bursting strength increased.

Features:

It has the characteristics of low cost, high corrosion resistance, nondestructive detection, zero damage point and convenient installation. With good corrosion resistance, weldability, thermal conductivity, lightweight, widely used in air conditioning refrigerators and other refrigeration industry can produce various specifications of aluminum mosquito coil pipe, one molding. Customized length, non-destructive detection zero damage point, multi-layer packaging, transportation safety length free customization, efficient protection isolation oxidation main production specifications (according to customer production specifications and length requirements).

Applications:

evaporimeter

condensator

dehumidifier

Cold dry machine

warm air blower

etc.

Techical Parameters:

physical characteristics and composition

1. The bimetallic composite pipe has a tensile strength of 150–160 MPa, an elongation of 35–40%, and a pressure resistance of at least 15 MPa.

2, copper-clad aluminum tube for the integration of materials; copper and aluminum cannot be separated, as with bending, flaring, and softness in copper pipe.

3. The pipe's section has a copper to aluminum weight ratio of 60:40, the same specifications as the original copper pipe, and the same outer diameter and wall thickness.

Air conditioning connection pipe

(Technical requirements refer to national standards or customer technical quality requirements for production)

Support and Services:

We can provide technical support and services for the use of aluminum pipes, including technical guidance, assistance in production, etc. Our experienced technicians can assist you with any problems your product may encounter. We also provide regular after-sales service to ensure that your products are always run at the highest efficiency. We are proud of our work and strive to provide the best customer service.

If you have any questions or concerns about the product or your use, please feel free to contact us. We will always give you the answers you need.

FAQ.:

Q1: aluminum alloy pipe compared with copper pipe, advantages and disadvantages?

A1: Aluminum pipe cost low ductility, but easy to corrosion. Copper pipes have good thermal conductivity and corrosion resistance, but the installation, preservation and transportation are not easy and the cost is high.

Q2: What should be noted in the installation of the air conditioning connection pipe?

A2: The alloy pipe is easy to install, but the link of copper and aluminum after a long time of chemical changes, will cause electrocouple corrosion.

Q3: How to deal with the corrosion problem?

A3: Our products use special corrosion resistant alloy, and the corrosion resistance effect is greatly improved compared with ordinary aluminum alloy. The corrosion resistance experiment is> 1000 hours, which greatly improves the service life of the product.

Q 4: What state and performance of aluminum pipe and aluminum alloy pipe can be produced?

A 4: It can produce performance products from hard state to soft state and interval.